NSX T 3 Edge Cluster Failover Scenario | LAB2PROD
In NSX-T 3.0 the edges require an active BFD session in order to remain in an up/active state. When you have two edge virtual machines in a cluster, they create…
Multisite Deployment of NSX-T Data Center Part 2| LAB2PROD
September 18, 2020 Multisite Deployment of NSX-T Data Center Part 2| LAB2PROD NSX-T Active-Active Multisite in a Single Region and Failover to a Secondary Region Part 2 This article will…
MTU Change on a vSphere Environment
A jumbo frame is an Ethernet frame with a payload greater than the standard maximum transmission unit (MTU) of 1,500 bytes. Jumbo frames allow ESXi to send larger frames out onto the physical network . Jumbo Frames can…
NSX-T Transport VLANs and Inter TEP Communication | LAB2PROD
November 15, 2020 NSX-T Transport VLANs and Inter TEP Communication | LAB2PROD Inter TEP Communication, Sharing Transport VLANs: Unpacking One of The Latest Features In NSX-T 3.1 This post will…
The Unofficial VCF Troubleshooting Guide v2 | LAB2PROD
March 4, 2021 The Unofficial VCF Troubleshooting Guide v2 | LAB2PROD Getting past those annoying issues when administering VMware Cloud Foundation (VCF) This is my unofficial VMware Cloud Foundation (VCF)…
Best Windows Monitoring: Netdata 2.0 Native Windows Agent
We take a look at the new native Windows monitoring found in Netdata. It is one of the easiest solutions you can choose to start monitoring your environment quickly, now…
NSX-T: Configure Network Address Translation (NAT)
Introduction Network address translation (NAT) in NSX-T Data Center can be configured on Tier-0 and Tier-1 gateways. Different types of NAT rules can be configured: Source NAT (SNAT): Supported on…
NSX-T 3.x – Configuring VRF Lite
In this post, I am going to demonstrate how NSX-T helps isolate routing domains by configuring NSX-T 3.x VRF lite. Virtual Routing and Forwarding (VRF) is a routing technology that…